A snow sweeper broom relies on several coordinated components to clear surfaces effectively. The rotating brush assembly is the most visible part, usually made from durable bristles designed to withstand cold temperatures and abrasion. The drive mechanism, often involving belts, chains, or gear systems, transfers power from the engine to the brush. Additional parts such as bearings, guards, and height-adjustment systems help ensure stable performance on uneven terrain. Recognizing how these components interact makes it easier to identify when replacement becomes necessary, especially after periods of heavy or prolonged use.

Routine inspection helps determine when parts are wearing out. Bristles tend to shorten, stiffen, or deform due to friction, which reduces sweeping efficiency. Drive belts or chains may show cracks, looseness, or misalignment, affecting power transfer to the brush. Bearings often produce grinding sounds or increased vibration when they begin to fail. Fasteners and protective covers can loosen or corrode over time, compromising the safety of the machine. Noticing changes in performance—such as uneven sweeping or reduced rotational speed—usually signals that one or more components require replacement.

Replacing parts on a snow sweeper broom begins with shutting down the machine and disconnecting its power source to avoid accidental activation. The brush assembly should be removed according to the manufacturer’s guidelines, taking care to inspect mounting hardware for wear. When swapping belts or chains, alignment and tension must be set correctly to prevent premature failure. Installing new bearings requires proper lubrication and handling to maintain smooth rotation. After reassembly, a test run should be conducted at low speed to ensure all components function properly. Regular preventive maintenance extends service life and keeps the equipment performing reliably during winter conditions.

https://www.tillerfactory.com/product/swivel-rotary-plow/single-rotary-plow-hyrps01.html
MODEL: HYRPS01
Working Width: 25cm
Working Depth: 30cm

Application
Allows for easy rotating 180 degrees between the two plowshares.
Reclamation and earthing up in greenhouse and orchard. Suitable for hard soil.
Contact us